How to make a wooden chair? 10 points? - diagrams for wooden swing sets
I want to store a simple wooden chair that would make a year 9 to do to be in the situation. Can I measurements and pictures and diagrams would be great. THANKKKKS.
Tuesday, December 8, 2009
Diagrams For Wooden Swing Sets How To Make A Wooden Chair? 10 Points?
1 comment:
What you need:
* Bear oak, cherry, pine, birch or other hardwood that weight. (See Tips for more information)
* The hammer, screwdriver or a gun nails, screws or nails in wood
* Tape Measure
* Power or hand saw
* Polls
* The paintbrush tool
* Several sandpaper "corn" and "stones" (owner) or electric sander
* Paints, varnishes, stains or
* Four pieces of felt
As wooden chairs
Step 1
Cut rounded 2x4 wood in four parts, each 16 cm long. This will be your chair legs.
Step 2
Cut a flat piece of wood 15 cm thick in a twelve-inch squares is. It is the seat of the presidency. To intersect with the paintbrush tool, a "pending" in the seat so that the seat of the chair has three quarters inch "drop".
Step 3
Cut a piece of wood in one of twelve square inch of your chair. What is the desired thickness, this piece of wood that you, as you know how thick or thin you to be the reverse. (See Tips for more information.)
Step 4
Sand, starting with a coarse grained sandpaper and finish with a very well when the desired degree of sweetness. Pay special attention to safety and in the back seat as the bullets can leave this area in some places very ill will probably be received into the body.
Step 5
Paint, stain, varnish or chair parts now dry, and leave completely. (See Tips for more information.)
Step 6:
Use your power or hand saw or a chisel or a hammer if you wish, make a notch at the top of each leg of a chair and the back seat of the chair at the back of the chair part s loaded correctly '.
Step 7
Bring your seat to the legs of the chair, with a hammer, screwdriver, nails and screws or nails or rifle.
Step 8
Bring your chair to the chair legs and seats with his hammer, screwdriver, nails and screws or nails or rifle. Make sure that the president can "move" back and forth.
Step 9
Do they fit the pieces of felt, cut to the legs of the chair.
Step 10
Enjoy your new president!
Ads by Google
Classical and Modern Chairs
Chairs, tables and chairs in our online catalog, consult now!
www.seditalsrl.com
The furniture contract asian
Hotel, restaurant, cafeteria, conference indoor-outdoor furniture (Pro)
www.asiacontract.com
Chairs
Global and local buyers directory, free download application for B2B products now!
www.Alibaba.com
Furniture Parts / Component
A station stop for all furniture needs
www.masinmarketing.com
Tips & Warnings
* If you buy the wood for the presidency, remember that the thicker pieces of wood on the legs, spare apartment in the back need to be (the thickness is desired from) and finer pieces for the seat flat.
* The decision to use the thickness of a piece of wood for the back, remember that the seat is tilted backwards, so that a three fourths inch to one inch "drop" between the back seat and backrest. Therefore, you do not want your supportbe as thick as the "shake" the inclination of the saddle.
* Even if you plan to leave their wood to its natural end, you may want to paint or at least put forward a sealant water somehow.
* Be careful when using power tools. Proper use of eye, ear and hand protection.
* Make sure the chair is sturdy enough to withstand the weight of the different people. Serious injuries can occur if the President had with someone close to him.
* Make sure all parts of the chair, which comes in contact with a person's body, are in the soft sand, and no splinters or pieces of wood remain acute.
Post a Comment